Hawke Sport Optics 1-4x20 Vantage IR Riflescope (Turkey Dot IR Reticle) - Manual (Page 7)

7
PRE-ZEROING
Pre-zero sighting can be done either visually or with a bore sighting collimator. If a bore sighting
collimator is not available, it is recommended to pre-zero visually.
1. With the firearm in a steady rest position, open the action of the firearm and look along the
bore to a predetermined target (at approximately 50 yards).
2. Scopes fitted with an adjustable objective or side focus should be adjusted to the 50 yard
position. Set a variable power scope to mid-power.
3. Remove the caps from the windage and elevation turrets. Adjust the windage and elevation
adjusters to position the reticle on the center of the target.
4. For windage adjustment, turn the windage adjustment turret clockwise to move the point of
impact left and counter clockwise to move the point of impact right. In the same manner, adjust