Hawke Sport Optics 1-4x20 Vantage IR Riflescope (Turkey Dot IR Reticle) - Manual (Page 10)

10
PARALLAX ADJUSTABLE MODELS
To give the best accuracy all riflescopes should be parallax error-free at the required target
distance. Non-parallax adjustable riflescopes are set at 100 yards to be parallax error-free. Any
other distance can cause a parallax error, this will show itself as a movement of the reticle on the
target. Riflescopes with parallax adjustment allow the shooter to correct this error for any target
distance. After the zero-in process, we recommend that the parallax adjustment is checked.
The riflescope has printed pre-set distance markings on the parallax adjuster, these are only a
guide to get you started. Shooters should test and adjust the parallax settings by using a measured
distance target to set the optical system to your personal eye condition. It is best to first bench
rest your rifle, set the riflescope magnification to the maximum setting, then proceed to check the
parallax markings, if required be prepared to re-mark the adjuster to your own personal settings.