Hawke Sport Optics 1-4x20 Vantage IR Riflescope (Turkey Dot IR Reticle) - Manual (Page 4)

4
relief) that allows you to see a full field of view.
4. Rotate the scope in the rings until the reticle pattern is perpendicular to the bore and the
elevation turret is on top.
5. Tighten the screws evenly on each side.
Warning: Avoid over tightening the rings. This can damage the scope affecting performance or
rendering it inoperable. (16 in/lbs) (1.33 ft/lbs) (1.8 Nm) for ring cap screws and (30 in/lbs) (2.5 ft/
lbs) (3.4 Nm) for ring base screws.
Warning: When installing a riflescope to a rifle with high levels of recoil, always ensure that there is
adequate eye relief. This will avoid eye injury.