GVision USA IP PVM 23.6" LED-Backlit Surveillance Monitor with 1080p Camera - Manual (Page 6)

WWW.GVISION-USA.COM
30398 Esperanza, Rancho Santa Margarita CA 92688 / Tel. 949-586-3338 / Fax. 949-272-4594 / Email. [email protected] 6
SOURCE MENU + -
Turn on / off the monitor
SOURCE Accesses the available video input signals (HDMI/ Camera/ Media)
MENU
Brings up the MONITOR Main menu. When in the OSD, press MENU button to return to
the previous menu or exit
+
Turn on the volume. In the MONITOR menu system, function like the right arrow button
on the remote control and adjusts menu controls.
-
Turn down the volume. In the MONITOR menu system, function like the left arrow
button on the remote control and adjust menu controls
1 POWER ON/OFF the LCD monitor
2
Press ‘SOURCE’ button to accesses the available video input signal menu, press ＋ button select,
press ‘SOURCE’ to enter the video mode
3 Press MENU button then press ＋／－ button move highlight icon left / right.
4
Press SOURCE button to enter the sub-menu ， then press ＋／－ button correspondingly to
change the setting
5 When the setting is done, press MENU button to return to the previous menu or exit
3
Control & Functions
If you cannot locate your remote, you can use the side panel buttons of your monitor to operate the
monitor’s features.
(* Depends on the types or models, the OSD button may not available)
How to Use Buttons
Use the buttons on the right side control panel to adjust the OSD