Kiloview 3G-SDI to H.264 Wireless Video Encoder - Manual (Page 25)

Version 1.0 © Changsha KILOVIEW Electronics CO., LTD. All rights reserved
G1-s VideoEncoders · User Manual
32
6.4 Encoding & Steam
6.4.1 Audio encoding parameter setting
Encoders can set audio encoding parameters. Click “Encoding &stream”, pull downward “Audio E ncoding
Engine”, then entering into audio parameters setting. Audio encoding channel is forced to enable. Audio
encoding modes include AAC and G.711, optional. Audio sampling is chosen according to actual
situation. Channels consist of “Stereo” and “Mono”. Encoding bitrate is adjustable between16K-256K,
default is 64Kbps. One more detail: if encoder using TS-UDP protocol or needs using recording, then it
needs to choose “With ADTS header” under AAC format.
Note: Please do "Quick Reset" to take affect if you changed the 'Resample policy' or 'Sampling'
parameter.