Kiloview 3G-SDI to H.264 Wireless Video Encoder - Manual (Page 18)

Version 1.1 © Changsha KILOVIEW Electronics CO.,LTD. All rights reserved
G1-s VideoEncoders · User Manual
25
⚫ On the configuration page, it shows video
source image on the area of
① to monitor
whether video source is normal. This image
stream is refreshed in three seconds.
⚫ Click ② for main stream configuration (Please
refer to 6.4.2).
⚫ Click ③ for audio encoding configuration
(Please refer to 6.4.1).
⚫ Click “ Pushing ” for stream service
configuration (Please refer to 6.4.3).
⚫ Click “ Video Clipping ” for video clipping
function.
⚫ Click “ OSD watermark” for image overlay
function configuration. APP only supports
text and time overlay configuration, image
overlay is configured on Web page (Please
refer to 6.7).
⚫ Click “ Network ” for network configuration
(Please refer to 5.3).
⚫ Click “ Signal Source ” for audio and video
source choice page (Please refer to 6.3).
⚫ “ Setting ” is used for quick reset, device
reboot, restoring factory settings and device
name modifications.
Click and enter into device information
page.