Kiloview 3G-SDI to H.264 Wireless Video Encoder - Manual (Page 20)

Version 1.0 © Changsha KILOVIEW Electronics CO., LTD. All rights reserved
G1-s VideoEncoders · User Manual
27
⚫ Video/Audio signals
It can show “ Video/audio signal ” , “ video format ” , “ preprocessing ” , “ audio sampling ” as below:
If “ video signal lock ” displayed as “ no signal (display blue screen) ” , it means the video input source is not
detected by the device . Please check if the input cable is plugged in. If “Audio sampling ” is displayed as
“0Hz”, the audio signal is not collected on the device. Please check if the audio of the input source is
normal.
6.2 Basic settings
Users can go for some basic functions settings here.
6.2.1 Change WEB login password
Click “Change Password”, a n option box will pop up, users can modify the WEB login password, the
default password is admin.
6.2.2 Location and time
Click “ location and time ” , then users can modify system time of the encoder, or just select “ Synchronize
from this PC ” .