Bose Professional FreeSpace 3 Series II Acoustimass Subwoofer Module (Black) - Manual (Page 5)

English • 5 Installation Guide • FreeSpace 3 Loudspeaker System
PRO.BOSE.COM Setup
Series II Acoustimass Bass Module
Required
q FreeSpace 3BF Bass Loudspeaker Rough-In Pan
or
w FreeSpace 3BF Bass Loudspeaker Tile Bridge
Optional
e FreeSpace 3BF Bass Loudspeaker Pendant-mounting Kit
r FreeSpace 3BF Bass Loudspeaker Surface-mount Kit
t FreeSpace 3BF Bass Loudspeaker Plenum Cover
y FreeSpace Omni Pendant-mount Kit
Flush-mount Satellites
Required
u FreeSpace 3F Satellite Loudspeaker Rough-in Pan
or
i FreeSpace 3F Satellite Loudspeaker Tile Bridge
Optional
o FreeSpace 3F Satellite Loudspeaker Cosmetic Covers
Surface-mount Satellites
a FreeSpace Omni Pendant-mount Kit
q
u
i
o
w
e r
t ya
Important Installation Information
It is the installer’s responsibility to ensure installation of the loudspeakers and mounting system is performed in accordance with all
applicable codes, including local building codes and regulations. Consult the local authority having jurisdiction before installing this
product.
It is the responsibility of the installer to ensure the safety of the loudspeaker installation. Failure to properly install the loudspeaker
could result in damage, injury, or death.
Do not mount the product in locations where it may be exposed to water or condensation.
This product is not intended for installation or use in indoor water facility areas (including, without limitation, indoor pools, indoor
water parks, hot tub rooms, saunas, steam rooms and indoor skating rinks).
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produces heat.
Keep the product away from fire and heat sources. Do not place naked flame sources, such as lighted candles, on or near the product.
Do not mount on surfaces that are not sturdy, or that have hazards concealed behind them, such as electrical wiring or plumbing. If
you are not sure about installing the bracket, contact a qualified professional installer. Ensure the bracket is installed according to local
building codes.
The hardware for securing the loudspeaker to the mounting surface is not supplied. Consult a building professional for the proper
mounting hardware before installing the loudspeaker.
Do not expose loudspeaker or mounting components to any chemical substances that are not specified by Bose, including but not
limited to lubricants, cleaning agents, contact sprays, or other hydrocarbon-based solvents. Exposure to such substances can lead to
degradation of the plastic material, resulting in cracking and creating a falling hazard.
Installation Options