Hensel Expert D 1000 Flash Kit - Manual (Page 9)

User Manual Expert D 500/1000
9 HENSEL-VISIT GmbH & Co. KG
• To prevent damages and tripping hazards, avoid laying
cables on the floor. If this is not possible, make sure that
the cables cannot be damaged by vehicles, ladders, etc.
• Damaged cables and housings need to be replaced imme-
diately by an authorized service department.
• Keep the minimum distance around the equipment unobst -
ructed to ensure proper ventilation.
• Keep core ducts unobstructed during operation to ensure
proper air supply.
• Do not insert objects into core ducts.
•
Do not place any objects on top of the equipment (coffee
cups, vases, containers filled with water, etc.).
• Protect the equipment from moisture, dripping or splashing
water.
• Choose safe locations for set up and make sure that the
equipment cannot fall into pools or bodies of water. Never
Never run cables directly along or even through pools or
bodies of water.
• Keep proper distance from flammable materials like deco -
rative fabrics or paper to prevent the risk of fire.
• Secure the equipment with a back-up support when atta -
ching it to ceilings or pantographs. Use the tilt bracket’s
safety screw 11 and secure the device additionally with a
safety rope. Suitable safety ropes can be purchased from
Hensel-Visit, see „14 Accessories“ on page 40.