Hensel Expert D 1000 Flash Kit User Manual
Page 31
User Manual Expert D 500/1000
31
HENSEL-VISIT GmbH & Co. KG
Setting group
The group setting lets you combine individual flash heads. This
allows you to jointly control the settings of the flash heads con
-
tained in this group.
Triggering of the flash heads is done via the channel assign
-
ment. Additionally, the transmitter can control all groups to
-
gether (master mode).
The setting is done with the
P7
key.
Â
Press the group selection key
P7
until the desired group is
shown in the LED bar.
- or -
Â
Press the
MASTER
key
P10
to select all groups.
The complete LED bar lights up and all flash heads with the
same channel are controlled regardless of group assign-
ment.
The compact flash unit can be individually assigned to a group.
The selected group (letter A-F) is shown in display
5
.
How to change the flash channel’s group assignment:
Â
Press the
RC
key
18
for ca. 2 s or press the digital rotary
encoder
16
.
The display is now blinking.
Â
Set the desired group (A to F) by
simultaneously pressing
and turning
the digital rotary encoder
16
within 3 s.
After 5 s the display returns to its former setting and shows the
selected performance output.
Checking channel/group assignment
Â
Press the
RC
key
18
for ca. 2 s or press the digital rotary
encoder
16
.
The display
5
is now blinking and shows the channel and
the group.
Transmitter
Expert D
500/1000