Planar Systems PZD2410 23.8" Monitor - Manual (Page 15)

13
| OPERATING INSTRUCTIONS
GENERAL INSTRUCTIONS
The control buttons are located at the back of the monitor (See Figure 4). Press the power
button to turn the monitor on or off. By changing these settings, the picture can be adjusted
to your personal preferences.
• The power cord should be connected.
• Connect the video cable from the monitor to the video card.
• Press the power button to turn on the monitor. The power indicator will light up.
1
2
3
4
5
Figure 5 External Control Button
1. OSD On / Off / Exit Selection
2. Scroll Up / Adjust Increase / Blue Light Reducer / Volume
3. Scroll Down / Adjust Decrease / ECO
4. Input select / Confirm selection
5. Power On / Off