Using the device, Turning the power on/off – GIGABYTE AORUS FI32Q X 32" 16:9 FreeSync QHD 240 Hz HDR IPS Gaming Monitor User Manual
Page 23
LCD Monitor User's Manual
-
23
-
USING THE DEVICE
Turning the Power On/Off
Make sure the power switch next to the AC power input jack is switched
to
ON
.
Power On
1.
Connect one end of the power cable to the AC IN jack at the rear of
the monitor.
2.
Connect other end of the the power cable to a power outlet.
3.
Press the
Control
button to turn on the monitor. The Power LED will
light in white, indicating the monitor is ready to use.
Note:
If the Power LED remains off after you turn on the monitor, please check
the
LED Indicator
setting in the
Settings
menu. Refer to page 40 .
Note:
When monitor power on, RGB LED on the rear side of monitor will turn
off automatically after 15 seconds in default setting. Please check the
RGB LED
setting in the
System
menu for select different RGB LED patterns.