Apple 27" Studio Display (Nano-Texture Glass, Tilt Adjustable Stand) - Manual (Page 93)

Studio Display
073-00335-A | 93 © 2022 Apple Inc. All rights reserved.
Cables | Removal
11. Follow the removal steps to
remove the right fan .
12. Use ESD-safe tweezers
to peel back the polyester
film tab. Use the flat end
of the black stick to flip up
the locking lever. Then slide
the end of the right fan flex
cable out of the connector.
13. Use the black stick to
peel the display backlight
cable from the housing to
remove it.
14. Use ESD-safe tweezers
to peel back the polyester
film tab on the logic board
end of the microphone
flex cable (1). Use the flat
end of the black stick to
press and hold the “PUSH”
button on the ZIF connector
on the logic board. Then use
ESD-safe tweezers to slide
the end of the flex cable out
of the connector.
15. Use ESD-safe tweezers
to peel back the polyester
film tab on the microphone
end of the microphone flex
cable (2). Use the flat end
of the black stick to press
and hold the “PUSH” button
on the ZIF connector on the
microphone. Then use ESD-
safe tweezers to slide the
other end of the flex cable
out of the connector.
16. Use the black stick to peel the microphone flex cable from the housing to remove it.