Apple 27" Studio Display (Nano-Texture Glass, Tilt Adjustable Stand) - Manual (Page 125)

Studio Display
073-00335-A | 125 © 2022 Apple Inc. All rights reserved.
4. Use the adjustable torque
wrench and the 20IP bit to
partially reinstall three 20IP
screws in the order shown:
3. Insert the 20IP bit into the 2.5–25 Nm adjustable torque wrench.
5. Set the torque value to 2.9
Nm. Use the adjustable
torque wrench and 20IP bit
to partially reinstall the two
20IP screws to 2.9 Nm in
the order shown.
Tilt- and Height-Adjustable Stand | Reassembly
• (452-07329) (1, 2)
• (452-07330) (3)