Apple 27" Studio Display (Nano-Texture Glass, Tilt Adjustable Stand) - Manual (Page 74)

Studio Display
073-00335-A | 74 © 2022 Apple Inc. All rights reserved.
USB-C Boards | Reassembly
Reassembly
1. Position the left and right
USB-C boards in the
housing. Then gently press
them into place.
2. Use the T3 screwdriver to
reinstall the six T3 screws
(923-07144).
The USB-C boards are
marked L and R near the
barcode to indicate their
position. The markings
may be different than the
image. Failure to install
the boards in the correct
positions will prevent the
display from connecting
to a Mac.
Important