Vizio M-Series Quantum Q7-J03 70" Class HDR 4K UHD Smart Quantum Dot LED TV - Manual (Page 32)

26
3
USING THE ADMIN & PRIVACY MENU
You can use the TV’s Admin & Privacy menu to restore the TV to its factory default
settings as well as access other administrative settings.
Using the ADMIN & PRIVACY menu, you can:
• Force the system to power off and on
Admin & Privacy
• View system information
Reboot TV
• View a customer service support code
System Information
• Check for system updates
Support Code
Check for Updates • Reset the TV to factory settings
Reset to Factory Settings
• Enable or disable viewing data
Viewing Data On
• Personalize advertising choices Advertising
VIZIO Privacy Policy
• View the VIZIO Privacy Policy
Store Demo Off
• Start or stop the store demo mode
Performing a Reboot
A reboot forces the TV to turn off then on again.
To retrieve your reboot the TV:
Menu > Admin & Privacy > Reboot TV
Viewing System Information
To view technical data and status information about your TV and network
connection:
Menu > Admin & Privacy > System Information
Accessing the Support Code
Retrieve a customer service support code/PIN or access basic TV information to
assist in a customer service interaction.
To retrieve your support code:
Menu > Admin & Privacy > Support Code
Checking for System Updates
To check for a system update:
Menu > Admin & Privacy > Check for Updates
Restoring the TV to Factory Default Settings
All of the on-screen menu settings can be reset to the factory defaults.
WARNING: If you restore the TV to the factory default settings, all
change you have made to the settings will be lost. This includes
any wireless or picture settings.
To restore the TV to its factory default settings:
Menu > Admin & Privacy > Reset to Factory Settings
1. If you set a system PIN code, enter it now.
2. The TV displays, “Select Reset to restore all TV settings to factory defaults."
3. Highlight Reset and press OK .
4. Wait for the TV to turn off. The TV will turn back on shortly afterward and the
setup process will begin.
If an update is found, the TV will ask to confirm the update. If no update is found, the
screen will note
The TV is up-to-date.