Vizio M-Series Quantum Q7-J03 70" Class HDR 4K UHD Smart Quantum Dot LED TV - Manual (Page 23)

17
3
Scanning for TV Channels
The TV may need to scan for channels before it can display programs and their
associated information. A channel scan is required for free over-the-air channels
(using an antenna) and cable channels from an out-of-the-wall connection (without a
cable box). Moving the TV to an area with different channels requires the TV to scan
for channels again.
Skipping Channels
After a channel scan is completed, you may find that some channels are too weak to
watch comfortably. There may also be some channels you do not want to view. You
can remove these channels from the TV’s memory with the Skip Channel feature.
SETTING UP TV CHANNELS
You can use the TV’s Channels menu to:
• Find channels
• Find new channels
• Select channels to skip
• Select analog audio mode
• Select the language for digital audio
• Set parental controls
TV Channels
Find Channels
Find New Channels
Skip Channel
Analog Audio
Digital Audio
Parental Controls
Stereo
English To perform an Auto Channel Scan:
Menu > TV Channels > Find
Channels
WARNING: Channels that have been removed with the Skip
Channel feature can still be viewed if the channel is entered using
the number pad.
If you wish to completely block a channgel from being viewed, use
see
Locking and Unlocking Channels on page 19.
Wait until the channel scan is 100% complete.
Find Channels
Channels Found
Digital
Analog
8
45% Complete
12
To remove a channel:
Highlight Done and press OK .
1. From the TV CHANNELS menu, highlight
• If the channel scan is canceled, the
Skip Channel , and press OK . The SKIP
channels that were already discovered are
CHANNEL menu is displayed. retained.
2. For each channel you wish to remove, use
the Up/Down Navigation buttons on
the remote to highlight the channel and
press
OK . A P appears to the right of each
channel you select.
To perform a New Channel Scan:
Menu > TV Channels > Find New Channels
A New Channel Scan saves the current channel map and scans for additional
channels.
Skip Channel
0 Test 0
1 Test 1
2 Test 2
3 Test 3
4 Test 4