Vizio M-Series Quantum Q7-J03 70" Class HDR 4K UHD Smart Quantum Dot LED TV - Manual (Page 11)

1
+
AAA
+
AAA
Replacing the Batteries
1. Push and slide the cover down. Then lift the cover to access the battery compartment.
2. Insert two batteries into the remote control. Make sure that the (+) and (-) symbols
on the batteries match the (+) and (-) symbols inside the battery compartment.
Input Power
Turn television on or off 3. Replace the battery cover and slide to close. Change the currently displayed input
App Launcher
Quickly launch the pictured app
Lift
SmartCast Home TM Button Menu
Launch or return to the SmartCast Home screen Display the settings menu
Push
WatchFree+ TM
Access free streaming channels
OK/Play/Pause
Select the highlighted menu option and
Navigation Buttons — Left / Right
play or pause content
Navigate the on-screen menus
Navigation Buttons — Up / Down
Navigate the on-screen menus Voice
Push and hold to make a voice command
Back
Go to the previous on-screen menu In many places batteries cannot be thrown away or discarded with household waste. Please ensure you
Closed Caption
properly dispose of your batteries consistent with the laws and/or regulations where you live. For more
Enable or disable close captions information please visit: www.vizio.com/environment
Long press to open Accessibility menu featuring captions,
talk back, speech rate, and zoom mode
WARNING: Keep the remote control batteries away from children. It may
Volume Up/Down cause choking and/or lead to a fire or chemical burn if mishandled. Do not
Increase or decrease the loudness of the audio dispose of batteries in fire. Replace only with batteries of the correct type.
Risk of fire or explosion if the battery is replaced by an incorrect type.
Mute
Turn the audio on or off
TIP: When needed, VIZIO recommends replacing the
batteries that came with this remote with two, new
Duracell ‘AAA’ alkaline batteries.
5
USING THE REMOTE