Sprolink NeoLIVE R2 Plus Video Switcher User Manual
Page 8
rection key, use the arrows keys to switch LOGO and press the knob to con-
firm.
d. In Image menu you can choose the picture mode and to edit the required
picture.
3.7 PTZ
a. R2Plus support up to four PTZ cameras control. Connect R2Plus and PTZ
camera by HDMI cable then use router or switch to set R2Plus and PTZ to the
same network segment.
b. The ip of PTZ can be modified by the combination of five-way key and knob;
the first three digits of the ip of PTZ should be consistent with the first three
digits of the ip of R2Plus. (Note: 192.168.5.163)
3.8 System Settings
a. System setup mainly includes network setup, time setup, device parameter
setup, system information and system reset.
b. Enter the network settings to view the MAC address, choose to turn on or off
the dynamic host configuration protocol, set the IP address, subnet mask and
default gateway, and apply the settings after completion.
Set the IP address, subnet mask and default gateway, and then apply the
settings after completion.
c. Ip address can be obtained by external cable, open DHCP one-key, or
manually through the five-way key and knob.
Both methods need to be applied before they can be saved and take effect.
Room 1010, the 2rd Building, Torch Xinke Plaza, Weili 2 Road, Huli district, Xiamen, China
+86 592 5565698
www.sprolink.com
XIAMEN SPROLINK SCIENCE & TECHNOLOGY CO., LTD
ENGLISH
中 文
language
System
24
04
Network
DHCP
IP
192.168.5.150
Mask
Gate
192.168.5.1
192.168.5.1
ON
OFF
APPLY
Auto
Auto
24h