Sprolink NeoLIVE R2 Plus Video Switcher - Manual (Page 6)

3. Menu Functions and Details
3.1 Input
a. Input setting mainly includes input detection of 4 HDMI signal sources and
picture setting. The input resolution of the current input source will be detected
and displayed when there is HDMI input source access.
b. When there is no HDMI input source, it can be manually set as TP test
pattern.
3.2 Output
The output contains output format and colorspace , which can be selected
according to the needs of the corresponding output, including
1080P60/1080P50/1080P30/1080P25/1080P24/1080i60/1080i50 output
format, the color mode is RGB Full mode by default, and add RGB Limit and
YUV two modes can be selected.
3.3 Layer
a. Switch mode is optional under the Layer menu, T-Bar Mode and Fast
Switching Mode. In T-Bar switching mode, switching the source will take effect
on the PST first. The PGM transition switching will only be completed when the
T-bar or Auto key is used.
In fast switching mode, switching the signal source will directly switch the
screen on the PGM.
b. The corresponding layer can be selected under the Layer menu for signal
source switching.
BG is the bottom layer, PIP is the top layer. Select the corresponding layer then
IN 1
[email protected]
IN 2
[email protected] TP1 TP2
IN 3 [email protected] IN 4 [email protected] TP1 TP2
TP2
TP2
TP1
TP1
Digital Zoom
POS 59,86
H SIize
H_Content
H Start
V Siize
V_Content
V Start
Scale
POS 44,6
60% 50%
1920
1920
0
1080
1080
0
Easy Mode
T-Bar Mode
T-Bar Mode
PST BG
HDMI3
Digital Zoom
POS 59,86
H SIize
H_Content
H Start
V Siize
V_Content
V Start
Scale
POS 44,6
60% 50%
1920
1920
0
1080
1080
0
PST BG
PGM BG
PST PIP
PGM PIP
T-Bar Mode
PST BG
HDMI 2