Common operation – Sprolink NeoLIVE R2 Plus Video Switcher User Manual

Page 4

Connecte the HDMI
monitor for PGM display.

2. Common Operation

2.1 Video Part

a. Press the "SCENE" button, turn the knob to select the image layout and
press the knob to conﬁrm, if it is the PIP, press the PIP button to select and

edit the corresponding layer under PST, there will be a green frame to mark
the selected layer, press the input source 1/2/3/4 button to switch the input
source for the layer, turn the knob to scale the selected image and use the
joystick to change the layer position.

b. Press the MODE button. When the button is red, press the input source

1/2/3/4 button to switch directly to the PGM screen. When the button is
green, press the input source 1/2/3/4 button to switch directly to the PST
screen.

c. After that, press the MENU button to enter the scene menu, select any

number to save, and the number is white when it is done. When you need to

load the saved scene, enter the scene menu and select the corresponding

number to load the scene.

d. Press the "EFFECT" button and rotate the button to select the transi

tion

eﬀect for the current layer.

Headphone jack

Supports audio
channel monitoring

Supports 2 channels of external
audio, this interface connects to a
microphone or external audio
mixer and is selected accordingly.

Connect the port to the computer using the Type-C cable, and
the computer will detect the R2 PLUS as HD Webcam and
microphone, users can use this interface for audio and video
live streaming.

Used to load pictures and logos from
a USB flash drive & firmware update
& records from a
USB drive

Connect the four
inputs to HDMI signal
source like camera,
computer or media
player

Plug the power adapter into
the power jack, making sure
the screws are tightened.

Support Web browser control, network
streaming and PTZ camera control.
Default IP is 192.168.0.177

Tally

External Tally device for
camera Indicator

USB2.0

1-4 video input interface

Monitor interface

Power Jack

Line in/Mic in

Network port control

Type-C interface lossless acquisition