beautypg.com

Installing the remote unit, Instruction manual – StarTech.com USB VGA KVM Console Extender over CAT5 UTP User Manual

Page 8

background image

Instruction Manual

5

Installing the Remote Unit

Place the Remote Unit near the computer.

1.

Switch off the computer and disconnect any existing VGA and input

2.

connections.

Using a StarTech.com integrated KVM cable (see page 1

5

for part

3.

numbers), connect the end of the cable that has two (USB) or three
(PS/2) connectors to the VGA Out connector and the USB or mouse
and keyboard PS/2 connectors on the computer as appropriate. (The
PS/2 version of the cable is color-coded.) Connect the opposite end
of the cable with a single connector to the gray-coded connector
marked COMPUTER on the Remote Unit of the KVM extender.

Connect a USB mouse, keyboard, and a VGA monitor to the indicators

4.

marked as CONSOLE on the Remote Unit.

Connect the UTP cable connection for Remote Unit to the NETWORK

5.

RJ-45 connector on the Remote Unit. Connect the opposite end to a
terminated wall outlet (if using premises cabling).

CAUTION:

The UTP network cables that connect the Host

and Remote Units carry electrical current and should not
be plugged in to other devices, as they may cause damage.
We strongly recommend marking the cables you are using
with this product at both locations for easy identification.