Instruction manual – StarTech.com USB VGA KVM Console Extender over CAT5 UTP User Manual

Page 13

Instruction Manual

Beep Codes

Some of the keyboard command sequences you issue to the

Host

Unit

have multiple possible settings. The unit will beep to indicate what setting
you have selected for the command you issued. (A short beep followed
by a long beep indicates an invalid command.)

[Ctrl] - [Ctrl] - [Alt]+[E]

(Compatibility Mode)

1 beep

: disabled

2 beeps

: enabled

[Ctrl] - [Ctrl] - [F3]

(Inactivity Interval for

Auto

Mode)

1 beep: 5 seconds

2 beeps: 15 seconds

3 beeps: 30 seconds

4 beeps: 60 seconds

[Ctrl] - [Ctrl] - [F4]

(Typematic Rate)

1 beep: 6 characters/sec.

2 beeps: 12 characters/sec.

3 beeps: 20 characters/sec.

4 beeps: 30 characters/sec.

Note:

Commands described in the [Key] - [Key] format are keys that

must be pressed in order on the keyboard. Commands described in the
[Key]+[Key] format must be pressed simultaneously.

Note:

If the

Num Lock

Caps Lock

, and

Scroll Lock

lights are flashing in

unison on the keyboard, the other Unit has control of Computer A. You
will not be able to use the computer or issue commands until the other
unit has finished using the computer.

Note:

If the Extender is operating in

Compatability Mode

([Ctrl] - [Ctrl] -

[E] hotkey sequence), you must enter [Ctrl] - [Ctrl] - [E] - [E] to access
port E on the attached KVM switch.