GRAM FS 441862 N (v)/1 User Manual
Page 34
EN - 32 -
How To Activate ?
Set “-16” set value and push set button until all leds are blink three times.
How It Works?
In stand-by mode; all components will be disabled. If user push set button while in stand-by
mode, all leds will blink three times to show stand-by mode is active.
How To Deactivate ?
Push and hold set button until display returns to normal working. After the mode is
deactivated, the “Alarm LED” may light on the display because the product may be hot.
The “Alarm LED” will turn off when the product reaches normal temperature.
Freezer Temperature Settings
•
The initial temperature of the setting display is -18 °C.
•
Press freezer setting button once.
•
Every time you press the button, the setting temperature will decrease. (-16 °C, -18 °C,
-20 °C,.. super freezing)
•
If you press freezer setting button until super freezer symbol is displayed on freezer.
•
Settings display and you do not press any button within the following 3 seconds, super
freezing will blink.
•
If you keep on pressing, it will restart from last value.
Recommended Temperature Values for Freezer
When to adjust
Inner Temperature
For minimum freezing capacity
-16
o
C, -18
o
C
In normal usage
-18
o
C, -20
o
C, -22
o
C
For maximum freezing capacity
-24
o
C