İhlas Aura Roboclean - Manual (Page 16)

16
16
3- Plug the Power Nozzle cord into
the dual socket slot under the
trigger arm.
2- Install the other side of the
telescopic tube to the joint part
of the Power Nozzle so that the
locking pin is engaged.
4- Install the cord retaining clamps to
the telescopic tube equal distance
from each other so that they hold the
Power Nozzle cord. To adjust the length
of the telescopic tube, push the button
located at the center of the tube in the
direction of the arrow and adjust the
tube to the desired length.
5 - Before starting to vacuum, press
the joint retaining latch on the
Power Nozzle to release the tube
from upright position.
1 - Install the telescopic tube to the
tube adaptor on the end of the
vacuum hose so that the locking
pin is engaged.
Setting up the Power
Nozzle