Yamaha P-115 - Manual (Page 31)

CLP-115 Keyboard Stand Assembly
ENGLISH
31
WARNING
An improper voltage setting can cause serious
damage to the CLP-115 or result in improper
operation.
7.
Set the adjuster.
After completing the assembly, please
check the following.
When moving the instrument after assembly, always
hold the bottom of the main unit.
CAUTION
Do not hold the key cover or top portion. Improper
handling can result in damage to the instrument or
personal injury.
• Are there any parts left over?
➝ Review the assembly procedure and correct any
errors.
• Is the CLP-115 clear of doors and other movable
fixtures?
➝ Move the CLP-115 to an appropriate location.
• Does the CLP-115 make a rattling noise when
you shake it?
➝ Tighten all screws.
• Does the pedal box rattle or give way when you
step on the pedals?
➝ Turn the adjuster so that it is set firmly against
the floor.
• Are the pedal and power cords inserted securely
into the sockets?
➝ Check the connection.
• If the main unit creaks or is otherwise unsteady
when you play on the keyboard, refer to the
assembly diagrams and retighten all screws.
Rotate the adjuster until it comes in firm contact with the
floor surface.
Top portion
Key cover