Irritrol PCW Control User Manual
Page 22

20
PCW Control
S
Installation
Multi-Zone Manual Program Setup
• Select the New button to open the Manual Preset Name
dialog box (Figure 2.31).
• Enter a program name, then click OK (Figure 2.32).
• The manual program name will be entered in the Multi-
Manual Presets drop-down menu (Figure 2.33).
• Select the Zone Button followed by the Add button to
format the manual watering program list. The zone order
selected will be the order of operation during the watering
program. Continue to add as many zones to the list as
preferred (Figure 2.34).
• Click on the zone number/name to highlight. Select the
amount of zone run time using the scroll arrows. Repeat
to assign a run time duration for each zone on the list (as
required) (Figure 2.35)
• After setup, the manual program can be accessed by name
at any time and started.
Figure 2.31
Figure 2.32
Figure 2.33
Figure 2.34
Figure 2.35