Displaying cpu usage statistics – H3C Technologies H3C SecPath U200-A U200-M U200-S User Manual
Page 55
46
slot 0
DEVICE_NAME:Navigator2-2
DEVICE_SERIAL_NUMBER:210231A91NA08B000004
MAC_ADDRESS:000f-e2ec-2ce0
MANUFACTURING_DATE:2009-1-13
VENDOR_NAME:H3C
•
Use the display device manuinfo slot slot-number command to display the electronic label data for
the interface module that is specified by the slot slot-number option.
DEVICE_NAME:Navigator2-2
DEVICE_SERIAL_NUMBER:210231A91NA08B000004
MAC_ADDRESS:000f-e2ec-2ce0
MANUFACTURING_DATE:2009-1-13
VENDOR_NAME:H3C
Table 12 Command output
Field Description
The operation is not
supported on the specified
board or subslot
The method that uses the display device manuinfo command to display the
electronic label data for interface modules is not supported.
Displaying CPU usage statistics
Use the display cpu-usage command to display CPU usage statistics.
Unit CPU usage:
1% in last 5 seconds
1% in last 1 minute
1% in last 5 minutes
Table 13 Command output
Field Description
Unit CPU usage
CPU usage statistics
1% in last 5 seconds
After a boot, the system calculates and records the average CPU usage rate
every five seconds.
This field displays the average CPU usage rate in the last five seconds.
1% in last 1 minute
After a boot, the system calculates and records the average CPU usage rate
every one minute.
This field displays the average CPU usage rate in the last minute.
1% in last 5 minutes
After a boot, the system calculates and records the average CPU usage rate
every five minutes.
This field displays the average CPU usage rate in the last five minutes.