ZeeVee ZvCli User Manual - Manual (Page 10)

Zv‐Cli v1_3 www.zeevee.com Page 10 of 32
‐ ZvCli and Firmware Version: Warning if there is a newer ZvCli or Firmware available.
‐ Date: Warning if the date on the computer differs greatly from the date in ZvBox.
‐ Video Input: Warning if the video format on the active video input is unrecognized.
‐ Audio Input: Warning if the audio format on the active audio input is not recognized.
‐ RF Conflict: ZvBox checks the selected RF channel for conflict before transmitting.
Syntax
show analysis
Example:
ZvCli$ show analysis
Host's current date/time : 2009:02:02:15:00:21 UTC (Mon 2009‐Feb‐02 10:00:21 Eastern Standard Time)
ZvBox date/time
: 2008:01:04:20:56:56 UTC (Fri 2008‐Jan‐04 15:56:56 Eastern Standard Time)
The date/time on ZvBox is significantly different than the time
on this machine (host). You may wish to set the date/time via
'set date'.
Transmit status
: *Transmitting, conflict detected
Energy was detected on this rf‐channel, so there may be another
source transmitting on this rf‐channel. If you experience problems
tuning this channel, you may wish to scan for free rf‐channels
and change the configuration to transmit on a free rf‐channel.
Input video resolution
: unrecognized
Unable to determine the input video resolution. Ensure that the
video source is transmitting a standard resolution.
ZvCli$
Show ZvCli Information
Provides information about the running ZvCli.
Syntax
show zvcli‐info
Example:
ZvCli$ show zvcli‐info
ZeeVee Command Line Interface (version 2.1.0.5609)
Copyright 2009, ZeeVee Inc.
ZvCli$
RF, Cable and Broadcast Commands
These commands are used for settings related to the local cable plant, and how ZvBox will broadcast.
Cable Scan
ZvBox products contain a very powerful feature that helps the installer greatly – a built‐in cable spectrum
analyzer. When asked, ZvBox will stop transmitting, analyze every RF channel on the cable and report the
result. The report shows if a channel is open or occupied, and if occupied, if the channel is Analog or Digital.