Obvius A7801 - Manual (Page 21)

Diagnostics
Connection Test
The connection test page will attempt to establish an HTTP session with the specified upload server. Click the “begin test”
to start this process. Information will be printed in black. Success responses will be printed in Green, failure messages will
be printed in Red. A sample upload test follows:
Note: Use the System/SystemLog page to set the log report level to Debug for more detailed information.
'2004-03-13 00:03:59',upload,INFO,ProcessUpload: Starting session: v0.04.0312b
'2004-03-13 00:03:59',upload,INFO,ProcessUpload: Logfile upload attempt 1 (max 3) started.
'2004-03-13 00:03:59',upload,INFO,ProcessUpload: HTTP session trace enabled.
'2004-03-13 00:03:59',upload,INFO,ProcessUpload: PPP Dialout disabled, connecting by Ethernet LAN.
'2004-03-13 00:03:59',upload,INFO,GetConnectionDetails: Upload URL looks ok,
resolving address for www.buildingmanageronline.com
'2004-03-13 00:04:02',upload,INFO,SendAcquiLiteStatus: sending info to remote server.
'2004-03-13 00:04:02',upload,INFO,TCPConnect: connecting to server at 70.99.203.62:80
'2004-03-13 00:04:03',upload,INFO,ReadUploadResult: Finished reading data from remote host.
'2004-03-13 00:04:03',upload,INFO,ReadUploadResult: Got: SUCCESS
'2004-03-13 00:04:03',upload,INFO,SendAcquiLiteStatus: AcquiLite status information was uploaded.
'2004-03-13 00:04:03',upload,INFO,UploadAllLogFiles: creating log file to upload
'2004-03-13 00:04:03',upload,INFO,UploadAllLogFiles: Start upload 3 records
'2004-03-13 00:04:03',upload,INFO,TCPConnect: connecting to server at 70.99.203.62:80
'2004-03-13 00:04:03',upload,INFO,SendDataFile: original log filesize = 291, total bodysize = 1479
'2004-03-13 00:04:04',upload,INFO,ReadUploadResult: Finished reading data from remote host.
'2004-03-13 00:04:04',upload,INFO,ReadUploadResult: Got: SUCCESS
'2004-03-13 00:04:04',upload,INFO,UploadAllLogFiles: 3 Log data records were uploaded successfully
'2004-03-13 00:04:04',upload,INFO,UploadAllLogFiles: Finished file upload procedure.
'2004-03-13 00:04:04',upload,INFO,SyncAllConfigFiles: Starting config file sync with remote server.
'2004-03-13 00:04:04',upload,INFO,TCPConnect: connecting to server at 70.99.203.62:80
'2004-03-13 00:04:05',upload,INFO,GetConfigManifest: finished sending manifest request, reading result.
'2004-03-13 00:04:05',upload,INFO,GetConfigManifest: config file loggerconfig.ini checksum match.
'2004-03-13 00:04:06',upload,INFO,GetConfigManifest: config file mb-001.ini differs
'2004-03-13 00:04:06',upload,INFO,GetConfigManifest: local file is newer by 31418 seconds.
'2004-03-13 00:04:06',upload,INFO,SyncAllConfigFiles: Remote configuration files are allowed.
'2004-03-13 00:04:06',upload,INFO,GetConfigManifest: config file manifest download complete
'2004-03-13 00:04:06',upload,INFO,TCPConnect: connecting to server at 70.99.203.62:80
'2004-03-13 00:04:07',upload,INFO,SendConfigFile: Start upload mb-001.ini
'2004-03-13 00:04:08',upload,INFO,ReadUploadResult: Finished reading data from remote host.
'2004-03-13 00:04:08',upload,INFO,ReadUploadResult: Got: SUCCESS
'2004-03-13 00:04:08',upload,INFO,SendConfigFile: config file uploaded successfully
'2004-03-13 00:04:08',upload,INFO,SyncTime: adjusted clock drift 0 seconds
'2004-03-13 00:04:08',upload,INFO,ProcessUpload: Upload process completed in 9 seconds
'2004-03-13 00:04:08',upload,INFO,ProcessUpload: Upload results: 2 ok, 0 fail
'2004-03-13 00:04:08',upload,INFO,ProcessUpload: Next upload scheduled for Mar 13, 2004 0:12:08 UTC.
Note in the last section where SUCCESS is indicated. (highlighted in this example for clarity).
LCD Console
The AcquiLite has an LCD console and two push buttons labeled “menu” and “select”. These can be used to configure some
of the basic features of the AcquiLite. The intended purpose of the console is to configure the AcquiLite to a point where a
computer can communicate with it for further detailed configuration.
When the AcquiLite is running, it will show “AcquiLite Ready” and the current time alternated with the ethernet IP address.
If you choose to enable the console display of data points, the LCD will also show the selected point names and current
reading values. The display will change to the next listed item about once every 10 seconds. If a data point name is longer
than will fit on the 16 character wide display, it will be scrolled. Pressing the select button will cause the display to change
to the next configured item. Pressing the select button quickly will skip through multiple display points.
Pressing the Menu button will cause the main menu to appear. Once [Main Menu] is shown on the console, the menu button
will change the menu option, and the select button will take action on the currently displayed option. Some options provide
sub menus, others allow you to edit the option value. The following is a tree display of the main menu and sub menus.
[Main Menu]
TCP/IP Config
[TCP/IP Config]
IP Address
Netmask
Page 21 A7801 AcquiLite – Data Acquisition Server