NavCom SF-2050 Rev.D - Manual (Page 28)

SF-2050 User Guide - Rev. D
Figure 7: SF-2050 Base Plate Dimensions
GPS Sensor
The SF-2050 GPS sensor can be mounted to a flat
surface using the four screw slots shown in Figure 7. In
environments with high vibration, shock absorbers
suitable for 1.8kg (4lbs) should be considered.
The SF-2050G can be installed in a backpack for mobile
surveying applications.
The sensor should not be placed in a confined space or
where it may be exposed to excessive heat, moisture, or
humidity.
‡
There are no user serviceable parts inside the SF-2050
GPS sensor. Undoing the four screws, which secure the
front end plate, and the four securing the rear end plate
will void the equipment warranty.
3-26