Marantz DV-17 - Manual (Page 13)

13
MAKING CONNECTIONS
ENGLISH
System Control Connections
REMOTE CONTROL IN/OUT jacks
By connecting this DVD player to another Marantz audio component
using a supplied D-BUS remote control cable, you can remotely
operate the components as a single system.
• When connecting to component with a remote sensor
(such as the SR-14, SR-18, SR-19), be sure to connect the
“REMOTE CONTROL IN” jack of this DVD player to the
“REMOTE CONTROL OUT” jack of the component with the
remote sensor.
• When connecting to component which is not equipped with
a remote sensor, be sure to connect the component to the
“REMOTE CONTROL OUT” jack of this DVD player.
Synchronized power on and off
• Connect with the remote control output jack of a
component (such as the SR-14, SR-18, SR-19) which is
compatible with Marantz remote control system. The
remote control allows to switch the power of this DVD
player to “POWER ON and Standby mode”.
Note
be sure to leave power switch on the Front panel in the power mode.
Remote switch
• When using this DVD player independently, set this switch
to “INTERNAL”. When using this DVD player in a system
with a Marantz tuner or timer equipped with a remote
sensor, set the switch to “EXTERNAL.
AUX
A/V EUROCONNECTOR TV
OUTPUT VIDEO OUTPUT AUDIO S2 1 2 VIDEO
2
L 1
R
COAXIAL OPTICAL
OUTPUT DIGITAL EXTERNAL INTERNAL
CONTROL REMOTE
IN
OUT
PAL
SYSTEM TV AUTO NTSC
OUT
IN
OUT
IN
REMOTE
CONTROL
INTERNAL EXTERNAL
TV or
monitor
A/V EUROCONNECTOR Connection
Using a commercially available 21-pin SCART cable, connect
the
A/V EUROCONNECTOR jack on the player to a TV or
VCR to achieve audio and video with a single connection.
• In addition to making physical connections to your TV or
monitor, it is also necessary to set the video output format
to composite video, S-video, or RGB in the Setup screen
Video menu ( page 26 ).
• SCART cables are available in a variety of configurations.
Before making connections, be sure to check that the
cable you are planning to use is appropriate for the TV or
monitor you are making connections to.
AUX
A/V EUROCONNECTOR TV OUTPUT VIDEO OUTPUT AUDIO S2 1 2 VIDEO
2
L 1
R
COAXIAL OPTICAL
OUTPUT DIGITAL
EXTERNAL INTERNAL
CONTROL REMOTE
IN
OUT
PAL
SYSTEM TV AUTO NTSC
TV AUX
VCR
depend on Video
output mode
(Page 26)
Please refer to your
TV's and VCR's
operator manual
CVBS
Audio L/R
SIGNAL FLOW for SCART