Marantz SA-KI Pearl Lite - Manual (Page 15)

10
Getting
started
Basic connections
Basic operation
Specifications
Index
Advanced connections
Advanced operations
Explanation of terms
Troubleshooting
ENGLISH
10
Getting
started
Basic connections
Basic operation Basic operation
Specifications
Index
Advanced connections
Advanced operations
Explanation of terms
Troubleshooting
Moving to the Beginning of Tracks (Skipping)
G Using the buttons on the main unitH
During playback, press <8 / 6 > or <7 / 9 > .
• The disc is skipped the number of tracks equal to the number of
times the button is pressed.
• When you press <8/6> once, playback restarts from the
beginning of the current track.
G Using the buttons on the remote controlH
During playback, press [8] or [9] .
• The disc is skipped the number of tracks equal to the number of
times the button is pressed.
• When you press [8] once, playback restarts from the beginning
of the current track.
Playing a Specific Track (Direct searching)
Press [NUMBER] ( 0 – 9 ) to select the track.
G ExampleH : Track 4 : Press number [4] to select Track No. 4.
G ExampleH : Track 12 : Press numbers [1] and [2] consecutively to
select Track No. 12.
The number you enter is set about 1.5 seconds after you press the
number buttons. To enter a two-digit number, be sure to press the
two number buttons, one immediately after the other.
Turning off display
During playback, press [DISPLAY ].
• Each time [DISPLAY] is pressed, the display brightness changes
as shown below.
Bright Dimm Dark
Off
When the display is switched off, the “DISPLAY OFF” indicator lights.
NOTE
During stop mode, the display information does not turn off. The
information is turned off only during playback.
To change time display
Press [TIME].
• When [TIME] is pressed each time, the display shows differently
in the following orders.
REMAIN TTL
Total remaining time
Not Displayed
Track elapsed time
REMAIN
Track remaining time
Listening with headphone
Plug the headphones into the headphone jack (PHONES).
Adjusting the Volume
Turn .
NOTE
To prevent hearing loss, do not raise the volume level excessively
when using headphones.
Playing repeatedly (Repeat Playback)
Press [REPEAT] to select repeat mode.
When [REPEAT] is pressed each time, the display switches repeat
modes in the following order.
Not Displayed
Repeat off
RPT
All-track repeat
1 RPT
1-track repeat
G Selectable itemsH
RPT (All-track repeat) : All tracks are played repeatedly.
1 RPT (1-track repeat) : Only 1 track is played repeatedly.
Not Displayed
(Repeat off)
: Normal playback resumes.
When repeat playback is set, random playback and AMS playback
cannot be performed.
Playing in random order
(Random playback)
During stop mode, press [RANDOM] .
The “RNDM” indicator on the display lights and random playback
starts.
Stopping Random Playback
Press [RANDOM] during stop mode.
The “RNDM” indicator on the display goes off.
NOTE
Repeat Play and AMS Play cannot be conducted when the unit is in
Random Mode.
• If
< 7 /9 > , or [ 9 ] are pressed during Random Play, the player
jumps to the next track of the shuffled order.
• To search through the current track during random play, press and
continue holding < 8 /6, 7/9 > or press [ 6 , 7 ] .
The random playback mode is canceled if you set power to standby,
turn off power, or open the disc tray.
Playback CDs
1.SA-KI PEARL LITE_ENG_6th_今井_0628.indd 10 2010/06/28 14:47:11