Marantz SA-KI Pearl Lite - Manual (Page 12)

7
ENGLISH
7
This chapter explains how to connect the analog device (amp) and
power cord.
For other connections, see the sections below.
n Digital connection (vpage 12)
n USB memory device/iPod connection (vpage 13)
n PC connection (vpage 13)
n Remote control connection (vpage 14)
NOTE
• Do not plug in the power cord until all connections have been
completed.
• When making connections, also refer to the owner’s manual of the
other components.
• Insert the plugs securely. Loose connections will result in the
generation of noise.
• Be sure to connect the left and right channels properly (left with
left, right with right).
• Do not bundle power cords together with connection cables.
Doing so can result in humming or noise.
• Do not connect the unit to the PHONO input connectors on the
amplifier.
Preparations
Connecting cables
Select the cables according to the equipment being connected.
Audio cables
Analog connections (stereo)
R
L
R
L
Audio cable (supplied)
(White)
(Red)
Basic connections
Analog connection
R L
R
L
AUDIO
R L
IN
AUDIO
Amplifier
Connecting the power cord
Do not plug in the power cord until all connections have been
completed.
To household power outlet
(AC 230 V, 50/60 Hz)
Power cord
(supplied)
NOTE
• Insert the plugs securely. Loose connections will result in the
generation of noise.
• Do not unplug the power cord while the unit is operating.
• Do not use a power cord other than the cord supplied with this unit.
1.SA-KI PEARL LITE_ENG_6th_今井_0628.indd 7 2010/06/28 14:47:09