Marantz SA-KI Pearl Lite - Manual (Page 14)

9
ENGLISH
9
Playback CDs
Playing Super Audio CDs or CDs
1 Press or [DISC] to change the input
source to “Disc”.
2 Insert a disc.
• Press 5 to open and close the disc tray.
• When you press 1 and close the Disc tray, “Toc Reading” is
displayed in the Display and then playback will start.
3 When playing back a super audio CD, press
[S.MODE] , and select the layer that you want to play
back.
SA-CD CD
4 Press 1.
The “1” display lights, and playback begins.
• When all of the tracks recorded on the disc have fi nished
playing back, playback stops automatically.
Stopping Playback
Press 2.
Stopping Playback temporarily
Press 3.
• The “3” indicator lights.
• To restart playback, press 1 or 3.
Fast-Forwarding and Fast-Reversing (Searching)
G Using the buttons on the main unitH
The search is started by holding down <8 / 6 > , <7 / 9 >
during playback.
The search speed can be changed by holding down
<8 / 6 > ,
<7 / 9 > .
The search speed changes in 4 steps: 1 2 3 4 1.
4 is the fastest search speed.
G Using the buttons on the remote controlH
The search is started by pressing [6] , [7] during playback.
The search speed can be changed by pressing [6] , [7] .
The search speed changes in 4 steps: 1 2 3 4 1.
4 is the fastest search speed.
Switching the input source
This unit supports the following playback functions in addition to disc
playback.
• Digital audio input signal playback
• USB memory device fi le playback from the USB port in the front
panel
• iPod fi le playback from the USB port in the front panel
• Computer fi le playback from the USB port in the rear panel
Before playing back fi les from a connected device, perform the
following operation to switch the input source.
Press or [INPUT] to select the input source.
Coaxial USB PC
Disc Optical
only
[Selectable items]
USB : Plays back fi les on the device connected to the USB
port (iPod/USB) on the front panel. (vpage 16,17)
PC : Connect a computer to the USB port (DIGITAL IN) on
the rear panel, and use this unit as a D/A converter.
(vpage 19)
Coaxial : Connect a digital device to the COAXIAL port (DIGITAL
IN) on the rear panel, and use this unit as a D/A
converter. (vpage 19)
Optical : Connect a digital device to the OPTICAL port (DIGITAL
IN) on the rear panel, and use this unit as a D/A
converter. (vpage 19)
Disc : Plays back the disc inside the disc tray. (vpage 9)
You can press [DISC] to switch the input source to “Disc”.
Button located on both the main unit and
the remote control
BUTTON
Button only on the main unit Button only on the remote control [BUTTON]Symbols used to indicate buttons in this manual12<7 / 9>53<8 / 6>DISPLAY OFFindicatorDISC tray[S.MODE][DISPLAY][TIME][INPUT][DISC][RANDOM][REPEAT]312[8, 9][NUMBER](0 – 9)[6, 7]1.SA-KI PEARL LITE_ENG_6th_今井_0628.indd 92010/06/28 14:47:11
Button only on the remote control [BUTTON]
Symbols used to indicate buttons in this manual
1 2 <7 / 9> 5
3 <8 / 6>
DISPLAY OFF
indicator
DISC tray
[S.MODE]
[DISPLAY]
[TIME]
[INPUT]
[DISC]
[RANDOM]
[REPEAT]
3
1 2
[8, 9]
[NUMBER]
(0 – 9)
[6, 7]
1.SA-KI PEARL LITE_ENG_6th_今井_0628.indd 9 2010/06/28 14:47:11