Marantz SA-14S1N - Manual (Page 21)

14
Preparation
Connections
Settings
Tips
Appendix
ENGLISH
Playback
Playing CDs
Playing Super Audio CDs or CDs
1 Press DISC/INPUT to change
the input source to “Disc”.
2 Insert a disc.
• Press OPEN/CLOSE to open and close
the disc tray.
• You can also close the disc tray by
pressing 1, then starts playback
automatically.
3 When playing back a Super
Audio CD, press SOUND
MODE, and select the layer
that you want to play back.
[Selectable items]
STEREO : Plays back the 2-channel area
of the Super Audio CD (the
default setting).
MULTI : Plays back the multi-channel
area of the Super Audio CD.
Multi-channel is downmixed to
2-channel.
CD : Plays back the CD layer of the
Super Audio CD.
4 Press 1
The 1 display lights, and playback begins.
• When all of the tracks recorded on the disc have finished
playing back, playback stops automatically.
n Stopping playback
Press 2.
n Stopping playback temporarily
Press 3.
• The 3 indicator lights.
• To restart playback, press 1.
n Fast-forwarding and Fast-reversing (Searching)
The search is started by holding down 8, 9 during
playback.
Normal playback resumes when the button is released.
n Moving to the beginning of tracks (Skipping)
During playback, press 8 or 9.
• The disc is skipped the number of tracks equal to the
number of times the button is pressed.
• When you press 8 once, playback restarts from the
beginning of the current track.
n Playing a specific track (Direct searching)
Use 0 – 9, +10 to select the track.
Example: Track 4 : Press 4
Example: Track 12 : Press +10 and 2
Example: Track 20 : Press +10, +10 and 0
Basic operation
n Setting the playback sound mode in advance
(Start sound mode)
When purchased, the sound mode setting is “STEREO”.
The procedure for specifying a different first-priority layer
is given below.
With no disc in the disc tray,
press SOUND MODE, then switch
to the desired layer setting.
• If a disc that does not contain the layer
set for top priority playback is loaded,
the contents recorded on another layer
are displayed automatically.
• This unit memorizes the setting. Even if you open/close the
disc tray or turn this unit off and on, the setting remains in
effect.
• The layer detection order is as follows for discs without an
area set for the first-priority layer or discs without any layer.
q STEREO w MULTI e CD