Advanced operations –audio cd, Ams play (searching for a specific track) – Marantz CD5003 User Manual

Page 18

NAMES AND

FUNCTIONS

BASIC

CONNECTIONS

BASIC

OPERA

TIONS

ADV

ANCED

CONNECTIONS

ADV

ANCED

OPERA

TIONS

TROUBLESHOOTING

OTHERS

ADV

ANCED

OPERA

TIONS

ENGLISH

ADVANCED OPERATIONS –AUDIO CD–

7 Skipping tracks during random

play to search other tracks

When the

¡/¢ button on the player or ¢

button on the remote control unit is pressed during
random play, the next track is selected at random
and played.
Conversely, when the

4/1 button on the player

4 button on the remote control unit is pressed

during random play, play returns to the start of the
track now playing.

AMS PLAY (SEARCHING
FOR A SPECIFIC TRACK)

All track intros, from the first track onward, are
played back in sequence, which is useful when
searching for a desired track.
You can choose whether to play 10, 20 or 30
seconds of each track.

During stop or play, press the AMS (auto music
scan) button on the remote control unit.

Press the AMS button repeatedly to switch through
the different scan modes.
“

” , “

”... (

aborts the scan

function) light on the display, and the “

3” indicator

flashes.

1 2

3 4

5 6

7 8

9 10

11 12

13 14

15 16

17 18

5 5

5 5 5 5

Flashes

All track intros, from the first track onward, are played
back in sequence, for the amount of time they have
been preset (10 sec. when first purchased).

1 2

3 4

5 6

7 8

9 10

11 12

13 14

15 16

17 18

TTL

TRK

TIME

5 5

5 5 5 5

Flashes

Once the track you want to hear has been found,
press the

3 button. The “3” indicator now lights,

and the track found and whatever comes after that
track will now be played normally.
When the RANDOM button on the remote control
unit is pressed during AMS play, the AMS play
function is released, and the random play mode is
established.

WHILE PLAYING, REPLAY A
SMALL TRACK PORTION AND
LISTEN AGAIN (QUICK REPLAY)

If the Q.REPLAY button is pressed during playback,
the play position will jump back by the length of time
set in MENU, and then resume.

Note:

Jump back cannot go beyond the beginning of
the current track.
When the Q.REPLAY button is pressed, if the
total length of the track being played is shorter
than the time set for quick replay, or if the track
elapsed playing time is shorter than the time set
for quick replay, the play position will return to the
beginning of the track and resume playing.

How to set the Quick Replay time

If there is a disc in the disc tray, remove the disc

and close the tray.

Press the MENU button on the remote controller

once then the

7 button four times.

The display will indicate “Quick Replay.”

Press the ENTER button of the remote control.

The currently time setting will be displayed

(at the time of purchase, this is set to 10
seconds).

CD5003_U_01_ENG.indd 15

08.6.19 8:22:07 AM