Marantz CD5003 - Manual (Page 11)

8
BASIC
CONNECTIONS
BASIC
OPERA
TIONS
ADV
ANCED
CONNECTIONS
ADV
ANCED
OPERA
TIONS
TROUBLESHOOTING
NAMES AND FUNCTIONS NAMES AND FUNCTIONS
OTHERS
ENGLISH
NAMES AND FUNCTIONS
u Power cord connector socket
Use the supplied power cord to connect to a
standard household power supply outlet.
REAR PANEL
REMOTE CONTROL REMOTE CONTROL
FLASHER IN FLASHER IN
DIGITAL AUDIO OUT DIGITAL AUDIO OUT ANALOG OUTPUT ANALOG OUTPUT
EXTERNAL EXTERNAL
INTERNAL INTERNAL
OPTICAL OPTICAL COAXIAL COAXIAL
MODEL NO. MODEL NO. CD5003 CD5003
IN IN
OUT OUT
L R
AC IN AC IN
u r t y q w e
q ANALOG OUT (analog output)
connectors
The music signals during play are output from
these connectors.
w DIGITAL AUDIO OUT COAXIAL
(digital coaxial output) connector
The music signals during play are output
digitally from this coaxial output connector.
Note:
• Digital signals are not output at some
settings. For details, see “DIGITAL OUTPUT
OFF” and “AUDIO EX SELECTION” (page
24).
e DIGITAL AUDIO OUT OPTICAL
(digital optical output) connector
The music signals during play are output
digitally from this optical output connector.
Note:
• Digital signals are not output at some
settings. For details, see “DIGITAL OUTPUT
OFF” and “AUDIO EX SELECTION” (page
24).
r REMOTE CONTROL IN and OUT
connectors
Using the supplied remote control connecting
cable, these connectors enable this player
to be connected to a Marantz component
equipped with remote control connectors.
These connections make it possible to control
an entire system that centers on the amplifier or
other such component.
t EXTERNAL/INTERNAL switch
The switch is set to INTERNAL, when first
purchased, enabling the player’s built-in signal
reception window to be used.
Before using the supplied connecting cable to
make the connection between the player and
the remote control connectors on a Marantz
equipment, set the switch to EXTERNAL.
Note:
Signals cannot be received from the remote
control unit if the switch is kept at EXTERNAL
when the player is to be used on its own.
y Flasher input connector
This is used to control this unit using a keypad
from another room.
Connect the player so that the power cord can
be removed easily as a precaution against
possible accidents.
CD5003_U_01_ENG.indd 8 CD5003_U_01_ENG.indd 8 08.6.19 8:22:04 AM 08.6.19 8:22:04 AM