Setting the back light – Marantz NR1601 User Manual
Page 66
60
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
ESPAÑOL
NEDERLANDS
SVENSKA
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
ESPAÑOL
NEDERLANDS
SVENSKA
Operating learn mode
Erasing the all sources
1
Press and hold down
SET
and
SOURCE SEL
until the LEARN
indicator blinks.
2
Press and hold down
D.MODE
and press
ON
and
STANDBY
.
LEARN indicator lights.
3
Press
ENTER
to continue erasing.
• The SEND indicator blinks twice and
the mode returns to LEARN mode.
• To cancel the erasing operation, do
not press
ENTER
and simply press any
other button.
4
To return the normal mode, press
SET
.
NOTE
Erasing codes will return to the factory preset code, or there will leave
empty if the button has no factory preset code.
Setting the back light
Press the Light button on the side of the remote control, and the
buttons on the remote control light for 2 seconds. If the Light button
is pressed while the buttons are lit, the buttons remain lit for another
2 seconds.
• Backlight is set on in the factory settings.
n
Disabling the backlight
Press and hold both
SET
and
STANDBY
until the SEND indicator
flashes twice.
n
Turning the backlight on
Press and hold both
SET
and
ON
until the SEND indicator flashes
twice.