beautypg.com

Set up speakers – Marantz NR1601 User Manual

Page 40

background image

34

ENGLISH

DEUTSCH

FRANÇAIS

ITALIANO

ESPAÑOL

NEDERLANDS

SVENSKA

ENGLISH

DEUTSCH

FRANÇAIS

ITALIANO

ESPAÑOL

NEDERLANDS

SVENSKA

1

Set up

the remote control unit

n

Set up the operation mode

Press

AMP

to set the remote control

unit to amplifier operation mode.

Press AMP

2

Connect the setup microphone.

3-1.Audyssey Auto Setup

MultEQ

at ear height at

Amp Assign: Normal

Front Sp. : A

F.Height : Measure

Start

Cancel

[ENT]:Select [RTN]:Back

Please place microphone

main listening position.

When the setup microphone is
connected, the following screen is
displayed.

3

Set up “Amp Assign”

Use

ui

to select “Amp Assign”.

3-1.Audyssey Auto Setup

MultEQ

at ear height at

Start

Cancel

[RTN]:Back

Please place microphone

main listening position.

Front Sp. : A

F.Height : Measure

Amp Assign: Normal

Set up speakers

around items indicate the settings.

This section provides the setup methods of speaker systems other than the 7.1-channel system (with surround back speakers).
For the setup methods of the 7.1-channel system with surround back speakers, see “Set up speakers (Audyssey® Auto Setup)” (
vpage 6) of “Simple version”.

First install and connect the speakers to this unit.

4

Use

o

p

to select the configuration

of the connected speakers.

Normal

Set when using 9.1-channel
(Front/Center/Surround/Surround
Back/Front height/Subwoofer)
speakers.

SPKR-C

Set for connecting a tweeter of
a front speaker to the SURR.
BACK/SPEAKER C terminals and
a woofer of the front speaker to
the FRONT A terminals.

5

Set up “F. Height”

Press u to select “F. Height”.

Measure

Set to measure the front height
speakers.

Skip

Set not to measure the front
height speakers.

6

Set up “Front.Sp.”

Use ui to select “Front Sp.” and

then press

o

p

to select a speaker.

A

Select this to use front speaker A.

B

Select this to use front speaker B.

NOTE

If “Mesure” is selected in step 5, select “A”. If
“B” is selected, the “F.Height” measurement
cannot be performed.

7

Proceed to page 8

“ Preparation ” step 5.

NOTE

After performing Audyssey Auto Setup, do not
change the speaker connections or subwoofer
volume. In event of a change, perform Audyssey
Auto Setup again.

Remote control operation

buttons

Move the cursor
(Up/Down/Left/Right)

Confirm the setting

Return to previous menu