Marantz NR1601 - Manual (Page 47)

41
Basic version
Simple version
Information
ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA
Advanced version
ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA
1
Display the screen for inputting characters (vpage 38
“Menu map”).
2
Press SEARCH/INFO while a normal screen is
displayed.
A keyboard screen is displayed.
3 Select a character to be changed.
q
Press uio p to select “[ ]” or “[ ]”.
w Press ENTER to place the cursor at the character
to be changed.
Each time ENTER is pressed, the cursor moves by one
character.
4 Select a character to be input with
uio p then press ENTER .
• The types of characters that can be input are
as shown below.
G Upper case characters/SymbolsH
ABCDEFGHIJKLMNOPQRST
UVWXYZ ’ ( )
z + - . / : ; < = > ?
G Lower case characters/NumbersH
abcdefghijklmnopqrst
uvwxyz[ ]0123456789
5 Repeat steps 3 and 4 to rename.
6
Use uio p to select “[OK]”, then press ENTER .
Remote control operation
buttons
Move the cursor
(Up/Down/Left/Right)
Confirm the setting Return to previous menu
Input Setup
Perform settings related to input source playback.
• You do not have to change the settings to use the unit. Make
settings when needed.
Menu operation
1
Press AMP to set the remote
control unit to amplifier
operation mode.
2
Press MENU .
The menu is displayed on the TV screen.
3
Press ui to select the menu to
be set or operated.
4
Press ENTER to enter the setting.
• To return to the previous item, press RETURN .
• Exiting the Menu, press MENU while the menu is displayed.
The menu display disappears.
Inputting characters