Marantz NR1601 - Manual (Page 30)

24
ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA
Tuning in radio stations
Listening to FM/AM broadcasts
1 Press TUNE twice to switch the
input source to “TUNER”.
2 Press BAND to select “FM” or
“AM”.
FM When listening to an FM broadcast.
AM When listening to an AM broadcast.
3 Tune in the desired broadcast
station.
q To tune in automatically (Auto tuning)
Press T.MODE to light the “AUTO” indicator on the display, then
use TUNING + or TUNING – to select the station you want to
hear.
w To tune in manually (Manual tuning)
Press T.MODE to turn off the display’s “AUTO” indicator, then use
TUNING + or TUNING – to select the station you want to hear.
• If the desired station cannot be tuned in with auto tuning, tune it in
manually.
• When tuning in stations manually, press and hold TUNING + or
TUNING – to change frequencies continuously.
• You can specify the duration of the on-screen display to be displayed
(default: 30 sec) at menu “TUNER” (vpage 54). Press uio p to
return to the original screen.
n Listening to preset stations
1
Press SHIFT/TOP MENU to select
the memory block (A to G).
2
Press PRESET + , PRESET – or
1 – 8 to select the desired preset
channel.
You can also operate via the main unit.
In this case, perform the following
operations.
Press o p to select the preset radio
station.
n Direct frequency tuning
You can enter the receiving frequency directly to tune in.
1
Press SEARCH/INFO .
2 Input frequencies using the 0 – 9.
• If o is pressed, the immediately preceding
input is cancelled.
3 When setting is completed, press
ENTER .
The preset frequency is tuned in.
n Presetting radio stations (Manual preset)
Your favorite broadcast stations can be preset so that you can tune
them in easily. Up to 56 stations can be preset.
• Stations can be preset automatically at “Auto Preset”
(vpage 42). If “Auto Preset” is performed after performing
“Manual Preset”, the “Manual Preset” settings will be overwritten.
1 Tune in the broadcast station you
want to preset.
2
Press MEMORY .
3
Press SHIFT/TOP MENU to select
the block (A to G) in which to
preset the channel (1 to 8 per
block), then press PRESET + ,
PRESET – or 1 – 8 to select the
preset number.
4
Press MEMORY again to complete
the setting.
• To preset other stations, repeat steps 1 to 4.
Default settings
Block (A – G)
and
Channel (1 – 8)
Default Settings
A1 – A8
87.5 / 89.1 / 98.1 / 108.0 / 90.1 / 90.1 / 90.1 /
90.1 MHz
B1 – B8
522 / 603 / 999 / 1404 / 1611 kHz,
90.1 / 90.1 / 90.1 MHz
C1 – C8 90.1 MHz
D1 – D8 90.1 MHz
E1 – E8 90.1 MHz
F1 – F8 90.1 MHz
G1 – G8 90.1 MHz
Specify a name for the preset broadcast station
(Preset Name) (vpage 43)