Inova Labs Activox DUO2 User Manual
Page 16

14
OPERATING
INSTRUCTIONS
continued
CAUTION: (1) Use the stationary base only at the LPM setting and for
the length of time prescribed by your physician. (2) Maintain at least
1 ft. (30 cm) between the wall and the unit. (3) Do not set the indicator
ball above the red line.
1. Flip the Power Switch to the “On”
position. A one second audible
beep will sound, the Power LED will
illuminate green and the system will
begin running. It takes approximately
two minutes to reach full oxygen
concentration.
2. Use the Flow Setting Control Dial to
set the oxygen flow to the prescribed
LPM setting.
NOTE: If a 5 LPM setting is utilized,
adjust the dial so that the flow
indicator ball does not rise above the
“5” mark as it may cause the device
to alarm.
3. Position the nasal cannula or
breathing accessory onto your face
securely and begin breathing.
OPERATING YOUR SYSTEM: