ilve Built-in Oven - Manual (Page 22)

Always ensure the oven is in manual mode .
The pot symbol with the steam coming from
it should be displayed. If there is an [A] on the
display it means that the oven is in auto mode,
to cancel this you must press both pot symbol
buttons simultaneously. The oven will
not operate if it is pre-programmed; it has to
be brought back to manual mode.
1. To set or adjust the time:
Press both pot buttons simultaneously
and then to adjust the timer press either the plus
or minus button accordingly.
2. To set the alarm:
hold in the bell button then the plus button
until you reach the required time. If you go over the
required time, press the minus button to bring it
back. You will now notice a bell symbol on the
display, this highlights that the alarm is on. If you
need to check how much time is left on the alarm,
press the bell button again as this will return
to the time display. When the alarm goes off the
oven will remain on and will ring for seven minutes
unless turned off, which can be done by pressing
the bell button. You can adjust the tone of the
alarm-only when the alarm is ringing press the
minus button and it will scroll through three
available tones. Select the tone that you require,
this tone will then sound the next time
you set the alarm.
3. Pre-programming the oven:
Press the button. Put in the duration that you
want to cook the item for by pressing the button.
Press the button. Select the time that you
want the item to finish cooking (by pressing the
button). You then need to select the mode
and temperature.
Digital clock (24 hour clock) Digital clock (Touch Control) Key
Minute
minder
Automatic
cooking
time
End of
cooking
time
Clock
timer
settings
clocks & timer controls
Buil
t-in Ovens
Description of the button options
1 TEMP : To select the temperature settings,
press the button once and it will start to flash.
Then use the knob to select your desired
cooking temperature, to confirm your temperature
selection, press the button again (you must
first select your cooking mode prior to selecting
your temperature).
2 ON/OFF : To turn the oven ON, touch the
on/off button for a period of 4 seconds to
deactivate the child lock. Then touch the
button once again to switch the oven On.
Then select the button and use the knob
to select your desired cooking function. note: the
child lock will reactivate once the oven has been
turned off.
3 CLOCK : use this button to select the pre
programmable timer options (BELL, Start cooking:
h-On, Finish cooking: End and time) use the
knob to make your desired settings. See Below
you ShouLd aLWayS SeLecT your cookIng
MOdE BEFOrE OPErATIng STEPS 1-3 In ThE
ABOVE dIAgrAM.
4 MODE : Press this button to activate the
mode selection feature. Turn the knob to
select your desired cooking mode (you must use
step 2 prior to using the mode feature).
5 -/+: Turn the knob clockwise to increase
your selection and anti clockwise to decrease your
selection.
1 2 3 4
22 ILVE Operating Manual