beautypg.com

Harken 60.2ST Winche User Manual

Page 6

background image

6

Radial Winch

60.2 ST

Installation and Maintenance Manual

Follow steps below only to install the winch using hexagonal headed bolts

8. Slide out the central shaft n°19

9. Unscrew the 6 hex screws n°17
( 20Nm/177 in-lb)

10. Remove the drum support n°16
Important: washer n°7 may remain inside the

drum support!

6. Completely unscrew the three screws n° 28

7. Remove the stripper arm housing n°21

Install the winch on the deck in the

position you have chosen, keeping

in mind the limits described on page

4 and using hexagonal headed M8

bolts.

This manual is related to the following products: