BSS Audio BLU-50 Install Guide - Manual (Page 8)

2
Mounting The BLU-50
Rack Mounting
To rack mount the BLU-50, first affix the rack ears (included) to both sides of the BLU-50 using two screws
(included) per side� The BLU-50 can then be installed into a standard 1U rack space using four rack screws
(included)�
When installing the BLU-50 into a rack, it is recommended that one empty rack space is left above and below the
device� This allows heat to safely dissipate� Furthermore, DO NOT attempt to install two BLU-50 devices side-by-
side into the same 1U rack space – doing so will prevent heat from safely dissipating� See the below diagram for
further clarification.
Rack mount ears
BLU-50 devices
Empty Space
Empty Space
Empty Space
Empty Space
Empty Space
To prevent cosmetic damage to the finish on the rack mount ears, use protective plastic cups (provided) under the
rack mounting screws (provided)�