BSS Audio BLU-50 Install Guide - Manual (Page 17)

11
WATCHDOG OUTPUT
Type:
Phoenix/Combicon connector for fail-safe control
Opto Output Current: 14mA maximum
Withstanding Voltage: 80V maximum (Off)
Series Impedance: 220Ω (Isolated)
CONTROL NETWORK
Connectors:
RJ45 Ethernet connector
Maximum Cable Length: 100m/300ft on Category 5 cable between device and Ethernet
switch
BLU LINK AUDIO NETWORK
Connectors:
2 x RJ45 Ethernet connectors
Maximum Cable Length: 100m/300ft on Category 5e cable between devices
Latency: 11/Fs [0�23ms@48k]
Pass Through Latency: 4/Fs [0�08ms@48k]
Maximum Number of Nodes: 60
POWER
Power Adapter:
12VDC, 30 watts, model part number PS1225DC/ST
(mains: 100-240VAC, 50/60Hz)
DC Input: 12-48V 30VA
BTU Rating: 85�3 BTU/hr
Operating Temperature Range: 5˚ to 35˚C (41˚ to 95˚F)
DIMENSIONS AND WEIGHT
Dimensions:
1�625” (41mm) X 8�63” (219mm) X 7�75” (197 mm)
Weight: 2�82lbs/1�28kg
BSS Audio incorporates high quality mechanical fans in some products� All mechanical fans have a limited life
expectancy� We recommend annual inspection of fans for dust occlusion and excessive noise� Fan assemblies
should be replaced after six to ten years of use� Environmental factors such as elevated temperature, dust, and
smoke can adversely affect fan life� Systems exposed to these conditions should be inspected more frequently� Fan
replacement can be performed either at the factory or by an experienced technician in the field. Please contact BSS
Technical Support for more information on purchasing replacement parts or product service�
BSS Audio has a policy of continued product improvement and accordingly reserves the right to change features
and specifications without prior notice.