Becker TRAFFIC ASSIST Z200 - Manual (Page 66)

66
>>> NAVIGATIONAL MODE
> D
> GB
> F
> I
> E
> P
> NL
> DK
> S
> N
> FIN
> TR
> GR
> PL
> CZ
> H
> SK
The Offroad button
In the Offroad settings window, you can
set whether the Traffic Assist starts route
guidance if:
• You are in a non-digitised area (of-
froad).
• Your destination is in a non-digitised
area.
With activated offroad function, the Traf-
fic Assist displays the direction of the
nearest digitised road, or the direction
from the digitised road nearest to the des-
tination, to the destination in the non-
digitised area. See "Offroad navigation"
on page 70.
> Press
Offroad in the settings menu.
The Offroad settings window appears.
> Press either or in order to acti-
vate or deactivate the offroad function.
> Confirm your selection by pressing the
OK button.
What is dynamic route guid-
ance?
Dynamic route guidance calculates the
route, while taking into account current
traffic announcements.
Traffic announcements are transmitted by
radio stations via the TMC (Traffic Mes-
sage Channel) in addition to the radio
programme and are received and analysed
by the navigation system. Receiving traffic
announcements is free of charge.
Note:
Dynamic route guidance is not available
for all countries (currently only Belgium,
Germany, Denmark, France, Italy, The
Netherlands, Austria, Sweden, Switzer-
land and Spain).
In Germany, messages are also received
via TMCpro.
TMC reception must be available in or-
der to activate dynamic navigation and
the functions described below.