Becker TRAFFIC ASSIST Z200 - Manual (Page 27)

27
GENERAL OPERATION >>>
> D
> GB
> F
> I
> E
> P
> NL
> DK
> S
> N
> FIN
> TR
> GR
> PL
> CZ
> H
> SK
> Confirm your entry by pressing the OK
button.
The following question appears shortly
thereafter:
Comply with highway code
> If you agree with this request, press the
OK key.
Switching off
You can switch the unit off at any time. If
necessary, new destinations should first be
saved.
> Press the key
for a few seconds.
The unit will enter sleep mode.
> Switch the On/Off switch to Off for fi-
nal deactivation of the unit.
Unit bracket
The Traffic Assist can be attached directly
to the windscreen with the unit holder.
Note:
Have you forgotten your PIN number?
> Press the
Forgotten PIN? button and
follow the instructions.
Note:
The Traffic Assist may only be used in ac-
cordance with the applicable national
road traffic act!
Note:
We recommend that you place the Traf-
fic Assist in sleep mode in the event of
short interruptions to operation (up to a
week).
This significantly reduces the switch-on
time and the Traffic Assist finds the satel-
lites required for navigation much faster.
Note:
The Traffic Assist and unit bracket must
not be exposed to long periods of direct
sunlight. Temperatures inside the vehicle
of +70 C and higher may damage parts of
the bracket.