BDI 9970 ARENA - Manual (Page 2)

2
assembly instructions
bdiusa . com customerservice @ bdiusa . com
B x 4
Step 3
Attach Spine (C) onto Cabinet Mount Brackets (M)
then fasten securely into place using four (4) 5/16 x
5/8 in Screws (B) and provided Allen Wrench (A).
NOTE: Mounting hole pattern can vary depending on
cabinet model. Select the four (4) hole pattern that
fits with the upper mounting slots and conceals them
below the top panel when viewed from cabinet front.
M
E
Step 4
Attach each Swiveling Bracket Assemby (D) to top
of Spine (C) with four (4) provided 5/16 x 1-3/4 in
Screws (E) using Allen Wrench (A). Be sure to position
each Swiveling Bracket Assembly so that it aligns with
and inserts cleanly into the Spine (C) holes.
NOTE: There are several mounting-height positions
to choose from on 3” increments. In general,
for larger TV’s (54” – 60”) select a higher set of
mounting holes; on smaller TV’s (40”- 46”) select a
lower set of mounting holes.
Front Mount
E
Side Mount
C